Phoenix Contact · HC-B
1648072 is a Phoenix Contact circuit breaker with Rated current Ie 16 A; Tripping characteristic 12 mm; Rated operational voltage 500 V. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A
-
Tripping characteristic12 mm
-
Rated operational voltage500 V
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
16 A |
| Rated operational voltage |
500 V |
| Tripping characteristic |
12 mm |
| Rated torque |
0.5 Nm ... 0.8 Nm |
| Mechanical |
| Weight |
78.72 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.5 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HC-B specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact HC-B variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
1648072 (this page) |
12 mm |
500 V |
| 1648030 |
12 mm |
500 V |
| 1648090 |
12 mm |
500 V |
| 1605569 |
— |
500 V |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1648072 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 500 V — and switches or conditions the load within the 16 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1648072
Phoenix Contact 1648072 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1648072; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated operational voltage: 500 V — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
- Tripping characteristic: 12 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated torque: 0.5 Nm ... 0.8 Nm — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1648072
Q.For 1648072, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 1648072. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under enclosure rating for catalog number 1648072?
For 1648072, enclosure rating is given as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Before ordering 1648072, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is 16 A. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1648072 replace the unit currently installed in my panel?
Compare catalog number 1648072 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1648072?
Send the full catalog number 1648072, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1648072.