Phoenix Contact · Connection Cable
1409865 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Breaking capacity Icu/Ics CAT5 (IEC 11801:2002); Enclosure rating IP67 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Breaking capacity Icu/IcsCAT5 (IEC 11801:2002)
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Breaking capacity Icu/Ics |
CAT5 (IEC 11801:2002) |
| Rated speed |
1 Gbps |
| I/O and communication |
| Bus interface |
Ethernet |
| Flame detection |
according to IEC 60332-1-2 |
| Mechanical |
| Weight |
760.4 g |
| Terminal wire size |
4x2xAWG26/7, SF/UTP |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
1409865 (this page) |
CAT5 (IEC 11801:2002) |
| 1401109 |
CAT5 (IEC 11801:2002) |
| 1406127 |
CAT5 (IEC 11801:2002) |
| 1407363 |
— |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1409865 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1409865
Phoenix Contact 1409865 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1409865; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Breaking capacity Icu/Ics: CAT5 (IEC 11801:2002) — Match it to the existing panel and upstream protection.
- Weight: 760.4 g — Record it with the other nameplate data when sourcing a replacement.
- Terminal wire size: 4x2xAWG26/7, SF/UTP — Confirm the revision of the installed unit before a like-for-like replacement.
- Flame detection: according to IEC 60332-1-2 — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1409865
Q.For 1409865, what does the specification table state about weight?
The specification table lists weight = 760.4 g for Phoenix Contact 1409865. Confirm this figure against the unit currently in the panel.
Q.Which value is published under terminal wire size for catalog number 1409865?
For 1409865, terminal wire size is given as 4x2xAWG26/7, SF/UTP. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1409865, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1409865 replace the unit currently installed in my panel?
Compare catalog number 1409865 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1409865 before ordering?
Match the catalog number 1409865 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.