Phoenix Contact · Connection Cable
1406127 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Breaking capacity Icu/Ics CAT5 (IEC 11801:2002); Enclosure rating IP67 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Breaking capacity Icu/IcsCAT5 (IEC 11801:2002)
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Breaking capacity Icu/Ics |
CAT5 (IEC 11801:2002) |
| Rated speed |
100 Mbps |
| I/O and communication |
| Bus interface |
Ethernet |
| Flame detection |
according to IEC 60332-1-2 |
| Mechanical |
| Weight |
103.72 g |
| Terminal wire size |
2x2xAWG26/7, SF/UTP |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
1406127 (this page) |
CAT5 (IEC 11801:2002) |
| 1401109 |
CAT5 (IEC 11801:2002) |
| 1407363 |
— |
| 1407473 |
CAT6A |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1406127 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1406127
Phoenix Contact 1406127 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1406127; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Flame detection: according to IEC 60332-1-2 — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Weight: 103.72 g — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1406127
Q.Where can I find the flame detection data for 1406127?
It is listed in the specification table for Phoenix Contact 1406127 as according to IEC 60332-1-2. Compare it with the nameplate of the installed unit before ordering.
Q.For 1406127, what does the specification table state about rated speed?
The specification table lists rated speed = 100 Mbps for Phoenix Contact 1406127. Confirm this figure against the unit currently in the panel.
Q.Which value is published under breaking capacity Icu/Ics for catalog number 1406127?
For 1406127, breaking capacity Icu/Ics is given as CAT5 (IEC 11801:2002). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1406127?
Send the full catalog number 1406127, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1406127.
Q.Can the 1406127 replace the unit currently installed in my panel?
Compare catalog number 1406127 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.