Phoenix Contact · HC-B
1648090 is a Phoenix Contact circuit breaker with Rated current Ie 16 A; Tripping characteristic 12 mm; Rated operational voltage 500 V. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A
-
Tripping characteristic12 mm
-
Rated operational voltage500 V
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
16 A |
| Rated operational voltage |
500 V |
| Tripping characteristic |
12 mm |
| Rated torque |
0.5 Nm ... 0.8 Nm |
| Mechanical |
| Weight |
156.42 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.5 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HC-B specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact HC-B variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
1648090 (this page) |
12 mm |
500 V |
| 1648030 |
12 mm |
500 V |
| 1648072 |
12 mm |
500 V |
| 1605569 |
— |
500 V |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1648090 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 500 V — and switches or conditions the load within the 16 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1648090
Phoenix Contact 1648090 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1648090; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 156.42 g — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: 16 A — Verify it in the project documentation before confirming the order.
- Rated torque: 0.5 Nm ... 0.8 Nm — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1648090
Q.Where can I find the weight data for 1648090?
It is listed in the specification table for Phoenix Contact 1648090 as 156.42 g. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1648090, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 1648090. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under certifications for catalog number 1648090?
For 1648090, certifications is given as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1648090 before ordering?
Match the catalog number 1648090 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1648090 replace the unit currently installed in my panel?
Compare catalog number 1648090 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.