Phoenix Contact · HC-B
1605569 is a Phoenix Contact industrial component with Rated current Ie 16 A; Rated operational voltage 500 V; Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A
-
Rated operational voltage500 V
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
16 A |
| Rated operational voltage |
500 V |
| Rated torque |
0.8 Nm ... 1.2 Nm (PE connection) |
| Mechanical |
| Weight |
72 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HC-B specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact HC-B variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
1605569 (this page) |
16 A |
500 V |
DIN rail / panel |
| 1605585 |
16 A |
500 V |
DIN rail / panel |
| 1605624 |
16 A |
500 V |
DIN rail / panel |
| 1605640 |
16 A |
500 V |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1605569 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 500 V — and switches or conditions the load within the 16 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1605569
Phoenix Contact 1605569 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1605569; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated operational voltage: 500 V — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: DIN rail / panel — Verify it in the project documentation before confirming the order.
- Rated torque: 0.8 Nm ... 1.2 Nm (PE connection) — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1605569
Q.Before ordering 1605569, which weight entry should be checked?
The weight entry quoted above is 72 g. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the certifications data for 1605569?
It is listed in the specification table for Phoenix Contact 1605569 as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1605569, what does the specification table state about rated torque?
The specification table lists rated torque = 0.8 Nm ... 1.2 Nm (PE connection) for Phoenix Contact 1605569. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1605569 replace the unit currently installed in my panel?
Compare catalog number 1605569 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1605569 before ordering?
Match the catalog number 1605569 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.