Phoenix Contact · Connection Cable
1407487 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.4 Nm |
| Rated speed |
100 Mbps |
| I/O and communication |
| Bus interface |
Ethernet |
| Flame detection |
in acc. with UL 1581, section 1061 |
| Mechanical |
| Dimensions (H x W x D) |
M12 hybrid plug pin assignment, 8-pos., Y-coded, pin side view |
| Weight |
87 kg/km |
| Terminal wire size |
1x4xAWG26 + 1x4xAWG20 |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1407487 (this page) |
up to 4 A |
| 1407473 |
up to 4 A |
| 1407474 |
up to 4 A |
| 1407363 |
up to 4 A |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1407487 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1407487
Phoenix Contact 1407487 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1407487; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: up to 4 A — Verify it in the project documentation before confirming the order.
- Rated torque: 0.4 Nm — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP67 (IEC 60529) — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1407487
Q.For 1407487, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP67 (IEC 60529) for Phoenix Contact 1407487. Confirm this figure against the unit currently in the panel.
Q.Which value is published under flame detection for catalog number 1407487?
For 1407487, flame detection is given as in acc. with UL 1581, section 1061. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1407487, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is M12 hybrid plug pin assignment, 8-pos., Y-coded, pin side view. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1407487 replace the unit currently installed in my panel?
Compare catalog number 1407487 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1407487 before ordering?
Match the catalog number 1407487 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.