Phoenix Contact · Sensor/Actuator Cable
1402551 is a Phoenix Contact industrial component with Rated current Ie up to 4 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.4 Nm (M12 connector) |
| I/O and communication |
| Flame detection |
According to DIN EN 60332-1-2 |
| Mechanical |
| Weight |
87 kg/km |
| Mounting |
DIN rail / panel |
| Terminal wire size |
18x 0.10 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Sensor/Actuator Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Sensor/Actuator Cable variants |
| Catalog number |
Rated current Ie |
Mounting |
|
1402551 (this page) |
up to 4 A |
DIN rail / panel |
| 1404136 |
up to 4 A |
DIN rail / panel |
| 1404187 |
up to 4 A |
DIN rail / panel |
| 1404199 |
up to 4 A |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1402551 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1402551
Phoenix Contact 1402551 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1402551; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Flame detection: According to DIN EN 60332-1-2 — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Weight: 87 kg/km — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1402551
Q.Before ordering 1402551, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the mounting data for 1402551?
It is listed in the specification table for Phoenix Contact 1402551 as DIN rail / panel. Compare it with the nameplate of the installed unit before ordering.
Q.For 1402551, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 18x 0.10 mm for Phoenix Contact 1402551. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 1402551?
Send the full catalog number 1402551, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1402551.
Q.Can the 1402551 replace the unit currently installed in my panel?
Compare catalog number 1402551 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.