Phoenix Contact · Media Converter
2989420 is a Phoenix Contact circuit breaker with Breaking capacity Icu/Ics Copper; Supply voltage 3.3 V (via Factoryline switch); Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Breaking capacity Icu/IcsCopper
-
Supply voltage3.3 V (via Factoryline switch)
-
Enclosure ratingIP20 (IEC 60529)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
Copper |
| Supply voltage |
3.3 V (via Factoryline switch) |
| Rated speed |
1 Gbps |
| Mechanical |
| Weight |
33 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % |
Values follow the Phoenix Contact Media Converter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The 2989420 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 3.3 V (via Factoryline switch) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2989420
Phoenix Contact 2989420 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2989420; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated speed: 1 Gbps — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Mounting: DIN rail / panel — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2989420
Q.For 2989420, what does the specification table state about supply voltage?
The specification table lists supply voltage = 3.3 V (via Factoryline switch) for Phoenix Contact 2989420. Confirm this figure against the unit currently in the panel.
Q.Which value is published under mounting for catalog number 2989420?
For 2989420, mounting is given as DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2989420, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 2989420?
Send the full catalog number 2989420, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2989420.
Q.Can the 2989420 replace the unit currently installed in my panel?
Compare catalog number 2989420 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.