Phoenix Contact · Connector
1402398 is a Phoenix Contact circuit breaker with Rated operational voltage <= 440 V AC; Breaking capacity Icu/Ics CAT5 (IEC 11801:2002); Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/IcsCAT5 (IEC 11801:2002)
-
Enclosure ratingIP20 (IEC 60529)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated operational voltage |
<= 440 V AC |
| Breaking capacity Icu/Ics |
CAT5 (IEC 11801:2002) |
| Mechanical |
| Weight |
76.9 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connector variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1402398 (this page) |
CAT5 (IEC 11801:2002) |
<= 440 V AC |
| 1404549 |
CAT6A |
72 V (DC) |
| 1407504 |
CAT5 |
— |
| 1407505 |
CAT5 |
— |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1402398 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the <= 440 V AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1402398
Phoenix Contact 1402398 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1402398; record the nameplate data of the unit being replaced before selecting an equivalent.
- Breaking capacity Icu/Ics: CAT5 (IEC 11801:2002) — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 76.9 g — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1402398
Q.Which value is published under mounting for catalog number 1402398?
For 1402398, mounting is given as DIN rail / panel. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1402398, which operating temperature entry should be checked?
The operating temperature entry quoted above is -25...+60 °C. Confirm this figure against the unit currently in the panel.
Q.Where can I find the enclosure rating data for 1402398?
It is listed in the specification table for Phoenix Contact 1402398 as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1402398 replace the unit currently installed in my panel?
Compare catalog number 1402398 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1402398 before ordering?
Match the catalog number 1402398 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.