Phoenix Contact · Connector
1407504 is a Phoenix Contact circuit breaker with Breaking capacity Icu/Ics CAT5; Enclosure rating IP20 (IEC 60529); Mounting DIN rail / panel. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Breaking capacity Icu/IcsCAT5
-
Enclosure ratingIP20 (IEC 60529)
-
MountingDIN rail / panel
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
CAT5 |
| Rated torque |
2 Nm ... 3 Nm (Installation-side) |
| Rated speed |
100 Mbps |
| I/O and communication |
| Flame detection |
in accordance with UL 2556, Section 9.1 and UL 1581, Section 1100 |
| Mechanical |
| Weight |
87 kg/km |
| Mounting |
DIN rail / panel |
| Terminal wire size |
1x4xAWG26 + 1x4xAWG20 |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connector variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1407504 (this page) |
CAT5 |
— |
| 1407505 |
CAT5 |
— |
| 1402398 |
CAT5 (IEC 11801:2002) |
<= 440 V AC |
| 1404549 |
CAT6A |
72 V (DC) |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1407504 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1407504
Phoenix Contact 1407504 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1407504; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated torque: 2 Nm ... 3 Nm (Installation-side) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Weight: 87 kg/km — Record it with the other nameplate data when sourcing a replacement.
- Breaking capacity Icu/Ics: CAT5 — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1407504
Q.Before ordering 1407504, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the rated torque data for 1407504?
It is listed in the specification table for Phoenix Contact 1407504 as 2 Nm ... 3 Nm (Installation-side). Confirm this figure against the unit currently in the panel.
Q.For 1407504, what does the specification table state about breaking capacity Icu/Ics?
The specification table lists breaking capacity Icu/Ics = CAT5 for Phoenix Contact 1407504. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1407504 before ordering?
Match the catalog number 1407504 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1407504 replace the unit currently installed in my panel?
Compare catalog number 1407504 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.