Phoenix Contact · Power Distributor
1406368 is a Phoenix Contact industrial component with Rated current Ie 20 A; Rated operational voltage 1000 V; Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie20 A
-
Rated operational voltage1000 V
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-25...+70 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
20 A |
| Rated operational voltage |
1000 V |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Frequency |
max. 10 |
| Rated torque |
10 Nm |
| Mechanical |
| Weight |
336.2 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
1 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Rated current Ie |
Mounting |
|
1406368 (this page) |
20 A |
35 mm DIN rail (IEC 60715) |
| 1412059 |
8 A (Higher ratings can be achieved with different configurations) |
35 mm DIN rail (IEC 60715) |
| 1437258 |
10 A |
35 mm DIN rail (IEC 60715) |
| 1452437 |
12 A |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1406368 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 1000 V — and switches or conditions the load within the 20 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1406368
Phoenix Contact 1406368 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1406368; record the nameplate data of the unit being replaced before selecting an equivalent.
- Terminal wire size: 1 mm² ... 2.5 mm² — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: 20 A — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Rated torque: 10 Nm — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1406368
Q.For 1406368, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+70 °C (IEC 60068-2-1) for Phoenix Contact 1406368. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under certifications for catalog number 1406368?
For 1406368, certifications is given as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1406368, which rated torque entry should be checked?
The rated torque entry quoted above is 10 Nm. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1406368 replace the unit currently installed in my panel?
Compare catalog number 1406368 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1406368 before ordering?
Match the catalog number 1406368 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.