Phoenix Contact · Power Distributor
1437258 is a Phoenix Contact industrial component with Rated current Ie 10 A; Enclosure rating IP20 (IEC 60529); Operating temperature -25...+70 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie10 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-25...+70 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
10 A |
| Tripping characteristic |
7 mm |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.35 Nm |
| Mechanical |
| Weight |
256 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.14 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Rated current Ie |
Mounting |
|
1437258 (this page) |
10 A |
35 mm DIN rail (IEC 60715) |
| 1406368 |
20 A |
35 mm DIN rail (IEC 60715) |
| 1412059 |
8 A (Higher ratings can be achieved with different configurations) |
35 mm DIN rail (IEC 60715) |
| 1452437 |
12 A |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1437258 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 10 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1437258
Phoenix Contact 1437258 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1437258; record the nameplate data of the unit being replaced before selecting an equivalent.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -25...+70 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Mounting: 35 mm DIN rail (IEC 60715) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1437258
Q.Where can I find the certifications data for 1437258?
It is listed in the specification table for Phoenix Contact 1437258 as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.For 1437258, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = 10 A for Phoenix Contact 1437258. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under terminal wire size for catalog number 1437258?
For 1437258, terminal wire size is given as 0.14 mm² ... 1.5 mm². Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1437258?
Send the full catalog number 1437258, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1437258.
Q.How do I confirm compatibility of 1437258 before ordering?
Match the catalog number 1437258 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.