Phoenix Contact 1404136 Sensor/Actuator Cable

SKU: 1404136
Regular price $267.61
In stock (81 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Sensor/Actuator Cable

1404136 is a Phoenix Contact industrial component with Rated current Ie up to 4 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Enclosure ratingIP20 (IEC 60529)
  • Operating temperature0...+55 °C (IEC 60068-2-1)
  • MountingDIN rail / panel

Specifications

Electrical
Rated current Ie up to 4 A
Rated torque 0.2 Nm (M8 connectors)
I/O and communication
Flame detection according to UL 758/1581 (horizontal)
Mechanical
Weight 45 kg/km
Mounting DIN rail / panel
Terminal wire size 18x 0.10 mm
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature 0...+55 °C (IEC 60068-2-1)
Certifications CE, UL, cULus

Values follow the Phoenix Contact Sensor/Actuator Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Sensor/Actuator Cable variants
Catalog number Rated current Ie Mounting
1404136 (this page) up to 4 A DIN rail / panel
1404187 up to 4 A DIN rail / panel
1404199 up to 4 A DIN rail / panel
1402551 up to 4 A DIN rail / panel

Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.

Where it sits in the control system

The 1404136 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1404136

Phoenix Contact 1404136 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1404136; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.

  • Rated current Ie: up to 4 A — Use it as the reference when cross-checking a current-production equivalent.
  • Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
  • Rated torque: 0.2 Nm (M8 connectors) — Check this value against the nameplate of the installed unit before ordering.
  • Terminal wire size: 18x 0.10 mm — Match it to the existing panel and upstream protection.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 1404136

Q.Where can I find the weight data for 1404136?

It is listed in the specification table for Phoenix Contact 1404136 as 45 kg/km. Compare it with the nameplate of the installed unit before ordering.

Q.For 1404136, what does the specification table state about mounting?

The specification table lists mounting = DIN rail / panel for Phoenix Contact 1404136. Confirm this figure against the unit currently in the panel.

Q.Which value is published under terminal wire size for catalog number 1404136?

For 1404136, terminal wire size is given as 18x 0.10 mm. Use the value as the reference when sourcing a current-production equivalent.

Q.Can the 1404136 replace the unit currently installed in my panel?

Compare catalog number 1404136 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Q.What should I include in an enquiry for 1404136?

Send the full catalog number 1404136, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1404136.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!