Phoenix Contact · circuit breaker
0712123 is a Phoenix Contact circuit breaker with Rated current Ie 0.25 A; Tripping characteristic B / C / D (EN 60934 / UL 1077); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie0.25 A
-
Tripping characteristicB / C / D (EN 60934 / UL 1077)
-
Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
-
Rated operational voltage250 V AC
Specifications
| Electrical |
| Rated current Ie |
0.25 A |
| Rated operational voltage |
250 V AC |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (EN 60934 / UL 1077) |
| Tripping characteristic |
B / C / D (EN 60934 / UL 1077) |
| Number of poles |
1 / 2 / 3 / 4 (EN 60934 / UL 1077) |
| Mechanical |
| Weight |
11.53 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
240 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact circuit breaker variants |
| Catalog number |
Rated operational voltage |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
0712123 (this page) |
250 V AC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 0712152 |
250 V AC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 0911034 |
<= 440 V AC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 0914141 |
65 V DC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0712123 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 250 V AC — and switches or conditions the load within the 0.25 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0712123
Phoenix Contact 0712123 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0712123; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Humidity: 240 h, 95 % RH, 40 °C — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: 0.25 A — Verify it in the project documentation before confirming the order.
- Rated operational voltage: 250 V AC — Check this value against the nameplate of the installed unit before ordering.
- Tripping characteristic: B / C / D (EN 60934 / UL 1077) — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 0712123
Q.Which value is published under humidity for catalog number 0712123?
For 0712123, humidity is given as 240 h, 95 % RH, 40 °C. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 0712123, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the rated current Ie data for 0712123?
It is listed in the specification table for Phoenix Contact 0712123 as 0.25 A. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 0712123 before ordering?
Match the catalog number 0712123 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 0712123?
Send the full catalog number 0712123, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0712123.