Phoenix Contact · DIN-rail power supply
1010288 is a Phoenix Contact circuit breaker with Rated current Ie 60 A; Tripping characteristic B / C / D (IEC 60947-2); Number of poles 1 / 2 / 3 / 4 (IEC 60947-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie60 A
-
Tripping characteristicB / C / D (IEC 60947-2)
-
Number of poles1 / 2 / 3 / 4 (IEC 60947-2)
-
Breaking capacity Icu/Ics6 kA / 10 kA (IEC 60947-2)
Specifications
| Electrical |
| Rated current Ie |
60 A |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (IEC 60947-2) |
| Tripping characteristic |
B / C / D (IEC 60947-2) |
| Number of poles |
1 / 2 / 3 / 4 (IEC 60947-2) |
| Rated torque |
2 Nm |
| Mechanical |
| Weight |
393 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
1 mm² ... 35 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
48 h, 95% RH, 40°C (IEC 60068-2-78) |
Values follow the Phoenix Contact DIN-rail power supply specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact DIN-rail power supply variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
1010288 (this page) |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
| 1010308 |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
| 1018294 |
U/I |
yes |
| 1019976 |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1010288 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 60 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1010288
Phoenix Contact 1010288 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 1010288; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Number of poles: 1 / 2 / 3 / 4 (IEC 60947-2) — Verify it in the project documentation before confirming the order.
- Operating temperature: -25...+60 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: 35 mm DIN rail (IEC 60715) — Match it to the existing panel and upstream protection.
- Rated impulse withstand Uimp: 4 kV (IEC 60947-2) — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1010288
Q.Before ordering 1010288, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the rated current Ie data for 1010288?
It is listed in the specification table for Phoenix Contact 1010288 as 60 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1010288, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 1 mm² ... 35 mm² for Phoenix Contact 1010288. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1010288 replace the unit currently installed in my panel?
Compare catalog number 1010288 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1010288?
Send the full catalog number 1010288, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1010288.