Phoenix Contact · circuit breaker
0914141 is a Phoenix Contact circuit breaker with Rated current Ie 6 A; Tripping characteristic B / C / D (EN 60934 / UL 1077); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie6 A
-
Tripping characteristicB / C / D (EN 60934 / UL 1077)
-
Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
-
Rated operational voltage65 V DC
Specifications
| Electrical |
| Rated current Ie |
6 A |
| Rated operational voltage |
65 V DC |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (EN 60934 / UL 1077) |
| Tripping characteristic |
B / C / D (EN 60934 / UL 1077) |
| Number of poles |
1 / 2 / 3 / 4 (EN 60934 / UL 1077) |
| Rated torque |
0.6 ... 0.8 Nm |
| Mechanical |
| Weight |
69.74 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 6 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
240 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact circuit breaker variants |
| Catalog number |
Rated operational voltage |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
0914141 (this page) |
65 V DC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 0914400 |
250 V AC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 0914439 |
250 V AC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 0914497 |
250 V AC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0914141 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 65 V DC — and switches or conditions the load within the 6 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0914141
Phoenix Contact 0914141 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0914141; verify the catalog number against your bill of materials before requesting a quotation.
- Weight: 69.74 g — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Number of poles: 1 / 2 / 3 / 4 (EN 60934 / UL 1077) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: 35 mm DIN rail (IEC 60715) — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 0914141
Q.Which value is published under enclosure rating for catalog number 0914141?
For 0914141, enclosure rating is given as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Before ordering 0914141, which humidity entry should be checked?
The humidity entry quoted above is 240 h, 95 % RH, 40 °C. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the rated insulation voltage Ui data for 0914141?
It is listed in the specification table for Phoenix Contact 0914141 as 440 V (IEC 60947-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 0914141 replace the unit currently installed in my panel?
Compare catalog number 0914141 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 0914141 before ordering?
Match the catalog number 0914141 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.