Phoenix Contact 0914837 Circuit Breaker

SKU: 0914837
Regular price $237.60
In stock (56 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · circuit breaker

0914837 is a Phoenix Contact circuit breaker with Rated current Ie 3 A; Tripping characteristic B / C / D (EN 60934 / UL 1077); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ie3 A
  • Tripping characteristicB / C / D (EN 60934 / UL 1077)
  • Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
  • Rated operational voltage65 V DC

Specifications

Electrical
Rated current Ie 3 A
Rated operational voltage 65 V DC
Rated insulation voltage Ui 440 V (IEC 60947-2)
Rated impulse withstand Uimp 4 kV (IEC 60947-2)
Breaking capacity Icu/Ics 6 kA / 10 kA (EN 60934 / UL 1077)
Tripping characteristic B / C / D (EN 60934 / UL 1077)
Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077)
Rated torque 0.6 ... 0.8 Nm
Mechanical
Weight 141.033 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.2 mm² ... 6 mm²
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature -25...+60 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity 240 h, 95 % RH, 40 °C

Values follow the Phoenix Contact circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact circuit breaker variants
Catalog number Rated operational voltage Tripping characteristic Breaking capacity Icu/Ics
0914837 (this page) 65 V DC B / C / D (EN 60934 / UL 1077) 6 kA / 10 kA (EN 60934 / UL 1077)
0914141 65 V DC B / C / D (EN 60934 / UL 1077) 6 kA / 10 kA (EN 60934 / UL 1077)
0914400 250 V AC B / C / D (EN 60934 / UL 1077) 6 kA / 10 kA (EN 60934 / UL 1077)
0914439 250 V AC B / C / D (EN 60934 / UL 1077) 6 kA / 10 kA (EN 60934 / UL 1077)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 0914837 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 65 V DC — and switches or conditions the load within the 3 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 0914837

Phoenix Contact 0914837 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0914837; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.

  • Operating temperature: -25...+60 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
  • Terminal wire size: 0.2 mm² ... 6 mm² — Record it with the other nameplate data when sourcing a replacement.
  • Rated impulse withstand Uimp: 4 kV (IEC 60947-2) — Confirm the revision of the installed unit before a like-for-like replacement.
  • Rated operational voltage: 65 V DC — Use it as the reference when cross-checking a current-production equivalent.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 0914837

Q.Where can I find the terminal wire size data for 0914837?

It is listed in the specification table for Phoenix Contact 0914837 as 0.2 mm² ... 6 mm². Use the value as the reference when sourcing a current-production equivalent.

Q.For 0914837, what does the specification table state about certifications?

The specification table lists certifications = CE, UL, cULus for Phoenix Contact 0914837. Check the revision of the installed unit if the catalog number has been superseded.

Q.Which value is published under breaking capacity Icu/Ics for catalog number 0914837?

For 0914837, breaking capacity Icu/Ics is given as 6 kA / 10 kA (EN 60934 / UL 1077). Compare it with the nameplate of the installed unit before ordering.

Q.Can the 0914837 replace the unit currently installed in my panel?

Compare catalog number 0914837 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Q.What should I include in an enquiry for 0914837?

Send the full catalog number 0914837, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0914837.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!