Phoenix Contact 0916589 Circuit Breaker Accessory

SKU: 0916589
Regular price $673.66
In stock (87 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Circuit Breaker Accessory

0916589 is a Phoenix Contact circuit breaker with Rated current Ie 50 A; Tripping characteristic B / C / D (EN 60934 / UL 1077); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ie50 A
  • Tripping characteristicB / C / D (EN 60934 / UL 1077)
  • Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
  • Rated operational voltage433 V (AC)

Specifications

Electrical
Rated current Ie 50 A
Rated operational voltage 433 V (AC)
Rated insulation voltage Ui 440 V (IEC 60947-2)
Rated impulse withstand Uimp 4 kV (IEC 60947-2)
Breaking capacity Icu/Ics 6 kA / 10 kA (EN 60934 / UL 1077)
Tripping characteristic B / C / D (EN 60934 / UL 1077)
Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077)
Input voltage range 24 V (Falling edge)
Mechanical
Weight 108.2 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 1.5 mm²
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature -25...+60 °C (IEC 60068-2-1)
Certifications CE, UL, cULus

Values follow the Phoenix Contact Circuit Breaker Accessory specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Where it sits in the control system

The 0916589 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 433 V (AC) — and switches or conditions the load within the 50 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 0916589

Phoenix Contact 0916589 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 0916589; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Rated current Ie: 50 A — Confirm the revision of the installed unit before a like-for-like replacement.
  • Weight: 108.2 g — Use it as the reference when cross-checking a current-production equivalent.
  • Rated impulse withstand Uimp: 4 kV (IEC 60947-2) — Verify it in the project documentation before confirming the order.
  • Tripping characteristic: B / C / D (EN 60934 / UL 1077) — Check this value against the nameplate of the installed unit before ordering.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 0916589

Q.Which value is published under terminal wire size for catalog number 0916589?

For 0916589, terminal wire size is given as 1.5 mm². Compare it with the nameplate of the installed unit before ordering.

Q.Before ordering 0916589, which rated insulation voltage Ui entry should be checked?

The rated insulation voltage Ui entry quoted above is 440 V (IEC 60947-2). Confirm this figure against the unit currently in the panel.

Q.Where can I find the tripping characteristic data for 0916589?

It is listed in the specification table for Phoenix Contact 0916589 as B / C / D (EN 60934 / UL 1077). Use the value as the reference when sourcing a current-production equivalent.

Q.How do I confirm compatibility of 0916589 before ordering?

Match the catalog number 0916589 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Q.What should I include in an enquiry for 0916589?

Send the full catalog number 0916589, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0916589.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!