Phoenix Contact · Connection Cable
2926289 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Tripping characteristic |
150 mm |
| Rated torque |
0.2 Nm |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
1,270.4 g |
| Terminal wire size |
Assembled shielded round cable |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2926289 (this page) |
up to 4 A |
| 2926218 |
up to 4 A |
| 2926234 |
up to 4 A |
| 2926250 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2926289 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2926289
Phoenix Contact 2926289 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2926289; verify the catalog number against your bill of materials before requesting a quotation.
- Degree of protection: ≥ IP54 (Installation location) — Match it to the existing panel and upstream protection.
- Rated current Ie: up to 4 A — Record it with the other nameplate data when sourcing a replacement.
- Tripping characteristic: 150 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated torque: 0.2 Nm — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2926289
Q.Which value is published under enclosure rating for catalog number 2926289?
For 2926289, enclosure rating is given as IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2926289, which rated torque entry should be checked?
The rated torque entry quoted above is 0.2 Nm. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the flame detection data for 2926289?
It is listed in the specification table for Phoenix Contact 2926289 as IEC 60332-1-2 (raw cable). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2926289?
Send the full catalog number 2926289, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2926289.
Q.Can the 2926289 replace the unit currently installed in my panel?
Compare catalog number 2926289 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.