Phoenix Contact · Connection Cable
1694910 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.4 Nm (M12 connector) |
| I/O and communication |
| Flame detection |
in accordance with UL 758/1581 FT2 |
| Mechanical |
| Weight |
18 kg/km |
| Terminal wire size |
32x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Mounting |
Rated current Ie |
|
1694910 (this page) |
— |
up to 4 A |
| 1694334 |
Rear mounting (M8 x 1, with locking nut) |
up to 4 A |
| 1694376 |
Rear mounting (M12 x 1, with flat nut) |
up to 4 A |
| 1693694 |
— |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1694910 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1694910
Phoenix Contact 1694910 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1694910; verify the catalog number against your bill of materials before requesting a quotation.
- Rated torque: 0.4 Nm (M12 connector) — Match it to the existing panel and upstream protection.
- Enclosure rating: IP67 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1694910
Q.Which value is published under enclosure rating for catalog number 1694910?
For 1694910, enclosure rating is given as IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1694910, which rated torque entry should be checked?
The rated torque entry quoted above is 0.4 Nm (M12 connector). Confirm this figure against the unit currently in the panel.
Q.Where can I find the terminal wire size data for 1694910?
It is listed in the specification table for Phoenix Contact 1694910 as 32x 0.10 mm. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1694910?
Send the full catalog number 1694910, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1694910.
Q.How do I confirm compatibility of 1694910 before ordering?
Match the catalog number 1694910 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.