Phoenix Contact · Connection Cable
1694376 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingRear mounting (M12 x 1, with flat nut)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
1 Nm ... 1.5 Nm (Installation-side) |
| Mechanical |
| Weight |
13.5 g |
| Mounting |
Rear mounting (M12 x 1, with flat nut) |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Mounting |
Rated current Ie |
|
1694376 (this page) |
Rear mounting (M12 x 1, with flat nut) |
up to 4 A |
| 1694334 |
Rear mounting (M8 x 1, with locking nut) |
up to 4 A |
| 1694910 |
— |
up to 4 A |
| 1693694 |
— |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1694376 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Rear mounting (M12 x 1, with flat nut) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1694376
Phoenix Contact 1694376 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1694376; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated torque: 1 Nm ... 1.5 Nm (Installation-side) — Verify it in the project documentation before confirming the order.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Weight: 13.5 g — Match it to the existing panel and upstream protection.
- Enclosure rating: IP67 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1694376
Q.For 1694376, what does the specification table state about rated torque?
The specification table lists rated torque = 1 Nm ... 1.5 Nm (Installation-side) for Phoenix Contact 1694376. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under mounting for catalog number 1694376?
For 1694376, mounting is given as Rear mounting (M12 x 1, with flat nut). Confirm this figure against the unit currently in the panel.
Q.Before ordering 1694376, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1694376?
Send the full catalog number 1694376, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1694376.
Q.How do I confirm compatibility of 1694376 before ordering?
Match the catalog number 1694376 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.