Phoenix Contact · Connection Cable
1693694 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
71.7 kg/km |
| Terminal wire size |
19x 0.15 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1693694 (this page) |
up to 4 A |
| 1693717 |
up to 4 A |
| 1693720 |
up to 4 A |
| 1693746 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1693694 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1693694
Phoenix Contact 1693694 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1693694; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Flame detection: DIN EN 50265 — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 71.7 kg/km — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Terminal wire size: 19x 0.15 mm — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1693694
Q.Where can I find the certifications data for 1693694?
It is listed in the specification table for Phoenix Contact 1693694 as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1693694, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 19x 0.15 mm for Phoenix Contact 1693694. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under flame detection for catalog number 1693694?
For 1693694, flame detection is given as DIN EN 50265. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1693694?
Send the full catalog number 1693694, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1693694.
Q.How do I confirm compatibility of 1693694 before ordering?
Match the catalog number 1693694 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.