Phoenix Contact · Connection Cable
1693717 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
81.2 kg/km |
| Terminal wire size |
19x 0.15 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1693717 (this page) |
up to 4 A |
| 1693720 |
up to 4 A |
| 1693746 |
up to 4 A |
| 1693694 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1693717 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1693717
Phoenix Contact 1693717 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1693717; record the nameplate data of the unit being replaced before selecting an equivalent.
- Flame detection: DIN EN 50265 — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Weight: 81.2 kg/km — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1693717
Q.Before ordering 1693717, which terminal wire size entry should be checked?
The terminal wire size entry quoted above is 19x 0.15 mm. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for 1693717?
It is listed in the specification table for Phoenix Contact 1693717 as IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1693717, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 4 A for Phoenix Contact 1693717. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1693717 before ordering?
Match the catalog number 1693717 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1693717 replace the unit currently installed in my panel?
Compare catalog number 1693717 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.