Phoenix Contact · Connection Cable
1668357 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.4 Nm (M12 connector) |
| I/O and communication |
| Flame detection |
in accordance with UL 758/1581 FT2 |
| Mechanical |
| Weight |
30 kg/km |
| Terminal wire size |
42x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1668357 (this page) |
up to 4 A |
| 1668056 |
up to 4 A |
| 1668959 |
up to 4 A |
| 1660889 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1668357 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1668357
Phoenix Contact 1668357 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1668357; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated current Ie: up to 4 A — Record it with the other nameplate data when sourcing a replacement.
- Rated torque: 0.4 Nm (M12 connector) — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Flame detection: in accordance with UL 758/1581 FT2 — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1668357
Q.Before ordering 1668357, which rated torque entry should be checked?
The rated torque entry quoted above is 0.4 Nm (M12 connector). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for 1668357?
It is listed in the specification table for Phoenix Contact 1668357 as IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1668357, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 4 A for Phoenix Contact 1668357. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1668357 replace the unit currently installed in my panel?
Compare catalog number 1668357 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1668357 before ordering?
Match the catalog number 1668357 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.