Phoenix Contact · Connection Cable
1660889 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Weight |
197 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
|
1660889 (this page) |
up to 4 A |
— |
| 1667950 |
up to 4 A |
48 V AC |
| 1667963 |
up to 4 A |
48 V AC |
| 1668056 |
up to 4 A |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1660889 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1660889
Phoenix Contact 1660889 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1660889; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated current Ie: up to 4 A — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Weight: 197 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1660889
Q.Which value is published under weight for catalog number 1660889?
For 1660889, weight is given as 197 g. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1660889, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Where can I find the mounting data for 1660889?
It is listed in the specification table for Phoenix Contact 1660889 as DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1660889?
Send the full catalog number 1660889, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1660889.
Q.How do I confirm compatibility of 1660889 before ordering?
Match the catalog number 1660889 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.