Phoenix Contact · Connection Cable
1667950 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 48 V AC; Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage48 V AC
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
48 V AC |
| Mechanical |
| Weight |
214.6 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
|
1667950 (this page) |
up to 4 A |
48 V AC |
| 1667963 |
up to 4 A |
48 V AC |
| 1660889 |
up to 4 A |
— |
| 1668056 |
up to 4 A |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1667950 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 48 V AC — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1667950
Phoenix Contact 1667950 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1667950; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated current Ie: up to 4 A — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1667950
Q.For 1667950, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+80 °C (IEC 60068-2-1) for Phoenix Contact 1667950. Confirm this figure against the unit currently in the panel.
Q.Which value is published under weight for catalog number 1667950?
For 1667950, weight is given as 214.6 g. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1667950, which rated operational voltage entry should be checked?
The rated operational voltage entry quoted above is 48 V AC. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1667950?
Send the full catalog number 1667950, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1667950.
Q.How do I confirm compatibility of 1667950 before ordering?
Match the catalog number 1667950 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.