Phoenix Contact · Connection Cable
1668959 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.4 Nm (M12 connector) |
| I/O and communication |
| Flame detection |
in accordance with UL 758/1581 FT2 |
| Mechanical |
| Weight |
23 kg/km |
| Terminal wire size |
42x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1668959 (this page) |
up to 4 A |
| 1668056 |
up to 4 A |
| 1668357 |
up to 4 A |
| 1660889 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1668959 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1668959
Phoenix Contact 1668959 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1668959; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated current Ie: up to 4 A — Use it as the reference when cross-checking a current-production equivalent.
- Rated torque: 0.4 Nm (M12 connector) — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Flame detection: in accordance with UL 758/1581 FT2 — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1668959
Q.Before ordering 1668959, which weight entry should be checked?
The weight entry quoted above is 23 kg/km. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the certifications data for 1668959?
It is listed in the specification table for Phoenix Contact 1668959 as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1668959, what does the specification table state about flame detection?
The specification table lists flame detection = in accordance with UL 758/1581 FT2 for Phoenix Contact 1668959. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1668959 before ordering?
Match the catalog number 1668959 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1668959?
Send the full catalog number 1668959, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1668959.