Phoenix Contact · Connection Cable
1621517 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 630 V AC (Overvoltage category III/3); Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage630 V AC (Overvoltage category III/3)
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
630 V AC (Overvoltage category III/3) |
| Rated speed |
100 Mbps |
| Mechanical |
| Weight |
140.5 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated operational voltage |
Mounting |
Rated current Ie |
|
1621517 (this page) |
630 V AC (Overvoltage category III/3) |
— |
up to 4 A |
| 1621559 |
630 V AC (Overvoltage category III/3) |
Front mounting/square flange (4x Ø 3.2 mm) |
up to 4 A |
| 1607127 |
— |
DIN rail / panel |
up to 4 A |
| 1619752 |
48 V AC |
— |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1621517 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 630 V AC (Overvoltage category III/3) — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1621517
Phoenix Contact 1621517 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1621517; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Rated operational voltage: 630 V AC (Overvoltage category III/3) — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated speed: 100 Mbps — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1621517
Q.For 1621517, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1621517. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated current Ie for catalog number 1621517?
For 1621517, rated current Ie is given as up to 4 A. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1621517, which operating temperature entry should be checked?
The operating temperature entry quoted above is -25...+80 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1621517?
Send the full catalog number 1621517, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1621517.
Q.How do I confirm compatibility of 1621517 before ordering?
Match the catalog number 1621517 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.