Phoenix Contact · Connection Cable
1621559 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 630 V AC (Overvoltage category III/3); Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage630 V AC (Overvoltage category III/3)
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
630 V AC (Overvoltage category III/3) |
| Rated speed |
100 Mbps |
| Mechanical |
| Dimensions (H x W x D) |
28 mm x 28 mm |
| Weight |
144.9 g |
| Mounting |
Front mounting/square flange (4x Ø 3.2 mm) |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated operational voltage |
Mounting |
Rated current Ie |
|
1621559 (this page) |
630 V AC (Overvoltage category III/3) |
Front mounting/square flange (4x Ø 3.2 mm) |
up to 4 A |
| 1621517 |
630 V AC (Overvoltage category III/3) |
— |
up to 4 A |
| 1607127 |
— |
DIN rail / panel |
up to 4 A |
| 1619752 |
48 V AC |
— |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1621559 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 630 V AC (Overvoltage category III/3) — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Front mounting/square flange (4x Ø 3.2 mm) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1621559
Phoenix Contact 1621559 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1621559; record the nameplate data of the unit being replaced before selecting an equivalent.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP67 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 144.9 g — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1621559
Q.Where can I find the enclosure rating data for 1621559?
It is listed in the specification table for Phoenix Contact 1621559 as IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1621559, what does the specification table state about rated operational voltage?
The specification table lists rated operational voltage = 630 V AC (Overvoltage category III/3) for Phoenix Contact 1621559. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under mounting for catalog number 1621559?
For 1621559, mounting is given as Front mounting/square flange (4x Ø 3.2 mm). Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1621559 before ordering?
Match the catalog number 1621559 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1621559 replace the unit currently installed in my panel?
Compare catalog number 1621559 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.