Phoenix Contact · Connection Cable
1619752 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 48 V AC; Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage48 V AC
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
48 V AC |
| Mechanical |
| Weight |
96.1 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated operational voltage |
Mounting |
Rated current Ie |
|
1619752 (this page) |
48 V AC |
— |
up to 4 A |
| 1607127 |
— |
DIN rail / panel |
up to 4 A |
| 1621517 |
630 V AC (Overvoltage category III/3) |
— |
up to 4 A |
| 1621559 |
630 V AC (Overvoltage category III/3) |
Front mounting/square flange (4x Ø 3.2 mm) |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1619752 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 48 V AC — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1619752
Phoenix Contact 1619752 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1619752; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Rated operational voltage: 48 V AC — Check this value against the nameplate of the installed unit before ordering.
- Weight: 96.1 g — Match it to the existing panel and upstream protection.
- Enclosure rating: IP67 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1619752
Q.Where can I find the certifications data for 1619752?
It is listed in the specification table for Phoenix Contact 1619752 as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.For 1619752, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 4 A for Phoenix Contact 1619752. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated operational voltage for catalog number 1619752?
For 1619752, rated operational voltage is given as 48 V AC. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1619752 before ordering?
Match the catalog number 1619752 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1619752 replace the unit currently installed in my panel?
Compare catalog number 1619752 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.