Phoenix Contact · Connection Cable
1507531 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Bus interface |
CANopen®/DeviceNet™ |
| Flame detection |
UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) |
| Mechanical |
| Weight |
57 g |
| Terminal wire size |
2xAWG24/19+2xAWG22/19 |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1507531 (this page) |
up to 4 A |
| 1507528 |
up to 4 A |
| 1507573 |
up to 4 A |
| 1507201 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1507531 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1507531
Phoenix Contact 1507531 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1507531; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: IP67 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Bus interface: CANopen®/DeviceNet™ — Use it as the reference when cross-checking a current-production equivalent.
- Terminal wire size: 2xAWG24/19+2xAWG22/19 — Verify it in the project documentation before confirming the order.
- Flame detection: UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1507531
Q.Before ordering 1507531, which terminal wire size entry should be checked?
The terminal wire size entry quoted above is 2xAWG24/19+2xAWG22/19. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the enclosure rating data for 1507531?
It is listed in the specification table for Phoenix Contact 1507531 as IP67 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.For 1507531, what does the specification table state about weight?
The specification table lists weight = 57 g for Phoenix Contact 1507531. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1507531?
Send the full catalog number 1507531, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1507531.
Q.Can the 1507531 replace the unit currently installed in my panel?
Compare catalog number 1507531 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.