Phoenix Contact · Connection Cable
1507528 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Bus interface |
CANopen®/DeviceNet™ |
| Flame detection |
UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) |
| Mechanical |
| Weight |
45 g |
| Terminal wire size |
2xAWG24/19+2xAWG22/19 |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1507528 (this page) |
up to 4 A |
| 1507531 |
up to 4 A |
| 1507573 |
up to 4 A |
| 1507201 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1507528 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1507528
Phoenix Contact 1507528 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1507528; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Weight: 45 g — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Flame detection: UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated current Ie: up to 4 A — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1507528
Q.Before ordering 1507528, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Where can I find the weight data for 1507528?
It is listed in the specification table for Phoenix Contact 1507528 as 45 g. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1507528, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+80 °C (IEC 60068-2-1) for Phoenix Contact 1507528. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1507528?
Send the full catalog number 1507528, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1507528.
Q.How do I confirm compatibility of 1507528 before ordering?
Match the catalog number 1507528 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.