Phoenix Contact · Connection Cable
1507573 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Bus interface |
CANopen®/DeviceNet™ |
| Flame detection |
UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) |
| Mechanical |
| Weight |
600 g |
| Terminal wire size |
2xAWG24/19+2xAWG22/19 |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1507573 (this page) |
up to 4 A |
| 1507528 |
up to 4 A |
| 1507531 |
up to 4 A |
| 1507201 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1507573 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1507573
Phoenix Contact 1507573 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1507573; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 600 g — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Flame detection: UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) — Match it to the existing panel and upstream protection.
- Rated current Ie: up to 4 A — Record it with the other nameplate data when sourcing a replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1507573
Q.For 1507573, what does the specification table state about weight?
The specification table lists weight = 600 g for Phoenix Contact 1507573. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 1507573?
For 1507573, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1507573, which flame detection entry should be checked?
The flame detection entry quoted above is UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1507573 before ordering?
Match the catalog number 1507573 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1507573?
Send the full catalog number 1507573, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1507573.