Phoenix Contact · Connection Cable
1430679 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.4 Nm (M12 connector) |
| I/O and communication |
| Flame detection |
in acc. to UL VW1 |
| Mechanical |
| Weight |
17 kg/km |
| Terminal wire size |
18x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1430679 (this page) |
up to 4 A |
| 1430682 |
up to 4 A |
| 1430064 |
up to 4 A |
| 1430077 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1430679 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1430679
Phoenix Contact 1430679 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1430679; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Enclosure rating: IP67 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Rated torque: 0.4 Nm (M12 connector) — Confirm the revision of the installed unit before a like-for-like replacement.
- Terminal wire size: 18x 0.10 mm — Use it as the reference when cross-checking a current-production equivalent.
- Flame detection: in acc. to UL VW1 — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1430679
Q.For 1430679, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1430679. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under weight for catalog number 1430679?
For 1430679, weight is given as 17 kg/km. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1430679, which operating temperature entry should be checked?
The operating temperature entry quoted above is -25...+80 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1430679 replace the unit currently installed in my panel?
Compare catalog number 1430679 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1430679?
Send the full catalog number 1430679, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1430679.