Phoenix Contact · Connection Cable
1430064 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.4 Nm (M12 connector) |
| I/O and communication |
| Flame detection |
According to DIN EN 60332-1-2 |
| Mechanical |
| Weight |
87 kg/km |
| Terminal wire size |
18x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1430064 (this page) |
up to 4 A |
| 1430077 |
up to 4 A |
| 1430132 |
up to 4 A |
| 1430200 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1430064 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1430064
Phoenix Contact 1430064 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1430064; verify the catalog number against your bill of materials before requesting a quotation.
- Flame detection: According to DIN EN 60332-1-2 — Verify it in the project documentation before confirming the order.
- Weight: 87 kg/km — Check this value against the nameplate of the installed unit before ordering.
- Rated torque: 0.4 Nm (M12 connector) — Match it to the existing panel and upstream protection.
- Terminal wire size: 18x 0.10 mm — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1430064
Q.Where can I find the operating temperature data for 1430064?
It is listed in the specification table for Phoenix Contact 1430064 as -25...+80 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.For 1430064, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1430064. Confirm this figure against the unit currently in the panel.
Q.Which value is published under enclosure rating for catalog number 1430064?
For 1430064, enclosure rating is given as IP67 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1430064 replace the unit currently installed in my panel?
Compare catalog number 1430064 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1430064?
Send the full catalog number 1430064, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1430064.