Phoenix Contact · circuit breaker
1115657 is a Phoenix Contact circuit breaker with Rated current Ie 4 A (per channel); Tripping characteristic B / C / D (EN 60934 / UL 1077); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie4 A (per channel)
-
Tripping characteristicB / C / D (EN 60934 / UL 1077)
-
Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
-
Rated operational voltage12 V DC
Specifications
| Electrical |
| Rated current Ie |
4 A (per channel) |
| Rated operational voltage |
12 V DC |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (EN 60934 / UL 1077) |
| Tripping characteristic |
B / C / D (EN 60934 / UL 1077) |
| Number of poles |
1 / 2 / 3 / 4 (EN 60934 / UL 1077) |
| Efficiency |
> 99 % |
| I/O and communication |
| Sensing distance Sn |
12874678.91 h (at 25 °C with 21 % load) |
| Mechanical |
| Weight |
95 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 4 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
96 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact circuit breaker variants |
| Catalog number |
Rated operational voltage |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
1115657 (this page) |
12 V DC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 1110984 |
12 V DC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 1065729 |
— |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 0712123 |
250 V AC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1115657 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 12 V DC — and switches or conditions the load within the 4 A (per channel) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1115657
Phoenix Contact 1115657 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 1115657; verify the catalog number against your bill of materials before requesting a quotation.
- Rated current Ie: 4 A (per channel) — Record it with the other nameplate data when sourcing a replacement.
- Sensing distance Sn: 12874678.91 h (at 25 °C with 21 % load) — Confirm the revision of the installed unit before a like-for-like replacement.
- Humidity: 96 h, 95 % RH, 40 °C — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 95 g — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1115657
Q.For 1115657, what does the specification table state about tripping characteristic?
The specification table lists tripping characteristic = B / C / D (EN 60934 / UL 1077) for Phoenix Contact 1115657. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under weight for catalog number 1115657?
For 1115657, weight is given as 95 g. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1115657, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1115657 before ordering?
Match the catalog number 1115657 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1115657 replace the unit currently installed in my panel?
Compare catalog number 1115657 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.