Phoenix Contact · circuit breaker
1110984 is a Phoenix Contact circuit breaker with Rated current Ie 10 A (per channel); Tripping characteristic B / C / D (EN 60934 / UL 1077); Number of poles 1 / 2 / 3 / 4 (EN 60934 / UL 1077). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie10 A (per channel)
-
Tripping characteristicB / C / D (EN 60934 / UL 1077)
-
Number of poles1 / 2 / 3 / 4 (EN 60934 / UL 1077)
-
Rated operational voltage12 V DC
Specifications
| Electrical |
| Rated current Ie |
10 A (per channel) |
| Rated operational voltage |
12 V DC |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (EN 60934 / UL 1077) |
| Tripping characteristic |
B / C / D (EN 60934 / UL 1077) |
| Number of poles |
1 / 2 / 3 / 4 (EN 60934 / UL 1077) |
| Efficiency |
> 99 % |
| I/O and communication |
| Sensing distance Sn |
11140621 h (at 25 °C with 21 % load) |
| Mechanical |
| Weight |
95 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 4 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
96 h, 95 % RH, 40 °C |
Values follow the Phoenix Contact circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact circuit breaker variants |
| Catalog number |
Rated operational voltage |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
1110984 (this page) |
12 V DC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 1115657 |
12 V DC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 1065729 |
— |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
| 0712123 |
250 V AC |
B / C / D (EN 60934 / UL 1077) |
6 kA / 10 kA (EN 60934 / UL 1077) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1110984 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 12 V DC — and switches or conditions the load within the 10 A (per channel) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1110984
Phoenix Contact 1110984 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 1110984; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Breaking capacity Icu/Ics: 6 kA / 10 kA (EN 60934 / UL 1077) — Verify it in the project documentation before confirming the order.
- Terminal wire size: 0.2 mm² ... 4 mm² — Check this value against the nameplate of the installed unit before ordering.
- Tripping characteristic: B / C / D (EN 60934 / UL 1077) — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1110984
Q.For 1110984, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1110984. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under humidity for catalog number 1110984?
For 1110984, humidity is given as 96 h, 95 % RH, 40 °C. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1110984, which operating temperature entry should be checked?
The operating temperature entry quoted above is -25...+60 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Can the 1110984 replace the unit currently installed in my panel?
Compare catalog number 1110984 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1110984?
Send the full catalog number 1110984, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1110984.