Phoenix Contact · Connection Cable
1027669 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingRear mounting (M16 x 1.5, with flat nut)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Weight |
26.09 g |
| Mounting |
Rear mounting (M16 x 1.5, with flat nut) |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1027669 (this page) |
up to 4 A |
| 1000042 |
up to 4 A |
| 1080745 |
up to 4 A |
| 1095900 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1027669 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Rear mounting (M16 x 1.5, with flat nut) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1027669
Phoenix Contact 1027669 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1027669; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Rated current Ie: up to 4 A — Verify it in the project documentation before confirming the order.
- Weight: 26.09 g — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP67 (IEC 60529) — Match it to the existing panel and upstream protection.
- Mounting: Rear mounting (M16 x 1.5, with flat nut) — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1027669
Q.Before ordering 1027669, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the rated current Ie data for 1027669?
It is listed in the specification table for Phoenix Contact 1027669 as up to 4 A. Compare it with the nameplate of the installed unit before ordering.
Q.For 1027669, what does the specification table state about mounting?
The specification table lists mounting = Rear mounting (M16 x 1.5, with flat nut) for Phoenix Contact 1027669. Confirm this figure against the unit currently in the panel.
Q.Can the 1027669 replace the unit currently installed in my panel?
Compare catalog number 1027669 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1027669?
Send the full catalog number 1027669, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1027669.