Phoenix Contact · Connection Cable
1000042 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 48 V AC; Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage48 V AC
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
48 V AC |
| Mechanical |
| Weight |
100 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1000042 (this page) |
up to 4 A |
| 1027669 |
up to 4 A |
| 1080745 |
up to 4 A |
| 1095900 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1000042 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 48 V AC — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1000042
Phoenix Contact 1000042 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1000042; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Weight: 100 g — Match it to the existing panel and upstream protection.
- Enclosure rating: IP67 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Rated operational voltage: 48 V AC — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1000042
Q.For 1000042, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP67 (IEC 60529) for Phoenix Contact 1000042. Confirm this figure against the unit currently in the panel.
Q.Which value is published under operating temperature for catalog number 1000042?
For 1000042, operating temperature is given as -25...+80 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1000042, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1000042 before ordering?
Match the catalog number 1000042 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1000042?
Send the full catalog number 1000042, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1000042.