Phoenix Contact · HC-BB
1687464 is a Phoenix Contact circuit breaker with Rated current Ie 16 A; Tripping characteristic 7.5 mm; Rated operational voltage <= 440 V AC. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A
-
Tripping characteristic7.5 mm
-
Rated operational voltage<= 440 V AC
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
16 A |
| Rated operational voltage |
<= 440 V AC |
| Tripping characteristic |
7.5 mm |
| Mechanical |
| Weight |
50.3 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.5 mm² ... 4 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HC-BB specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact HC-BB variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
1687464 (this page) |
7.5 mm |
<= 440 V AC |
| 1014423 |
10 mm |
500 V |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1687464 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the 16 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1687464
Phoenix Contact 1687464 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1687464; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Weight: 50.3 g — Match it to the existing panel and upstream protection.
- Rated current Ie: 16 A — Record it with the other nameplate data when sourcing a replacement.
- Tripping characteristic: 7.5 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1687464
Q.Which value is published under rated operational voltage for catalog number 1687464?
For 1687464, rated operational voltage is given as <= 440 V AC. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1687464, which tripping characteristic entry should be checked?
The tripping characteristic entry quoted above is 7.5 mm. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the weight data for 1687464?
It is listed in the specification table for Phoenix Contact 1687464 as 50.3 g. Confirm this figure against the unit currently in the panel.
Q.Can the 1687464 replace the unit currently installed in my panel?
Compare catalog number 1687464 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1687464 before ordering?
Match the catalog number 1687464 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.