Phoenix Contact · HC-BB
1014423 is a Phoenix Contact circuit breaker with Rated current Ie 16 A (power contacts); Tripping characteristic 10 mm; Rated operational voltage 500 V. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A (power contacts)
-
Tripping characteristic10 mm
-
Rated operational voltage500 V
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
16 A (power contacts) |
| Rated operational voltage |
500 V |
| Tripping characteristic |
10 mm |
| Rated torque |
0.8 Nm ... 1.2 Nm (PE connection) |
| Mechanical |
| Weight |
165 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.5 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HC-BB specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact HC-BB variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
1014423 (this page) |
10 mm |
500 V |
| 1687464 |
7.5 mm |
<= 440 V AC |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1014423 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 500 V — and switches or conditions the load within the 16 A (power contacts) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1014423
Phoenix Contact 1014423 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1014423; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated current Ie: 16 A (power contacts) — Use it as the reference when cross-checking a current-production equivalent.
- Rated operational voltage: 500 V — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Tripping characteristic: 10 mm — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1014423
Q.For 1014423, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 1014423. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 1014423?
For 1014423, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1014423, which rated torque entry should be checked?
The rated torque entry quoted above is 0.8 Nm ... 1.2 Nm (PE connection). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1014423 replace the unit currently installed in my panel?
Compare catalog number 1014423 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1014423?
Send the full catalog number 1014423, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1014423.