Phoenix Contact · Connection Cable
1681460 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Tripping characteristic |
5 mm |
| Rated torque |
0.4 Nm (M12 knurl) |
| Mechanical |
| Weight |
24.17 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1681460 (this page) |
up to 4 A |
| 1681127 |
up to 4 A |
| 1681198 |
up to 4 A |
| 1681664 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1681460 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1681460
Phoenix Contact 1681460 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1681460; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Tripping characteristic: 5 mm — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Rated torque: 0.4 Nm (M12 knurl) — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1681460
Q.Before ordering 1681460, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 4 A. Confirm this figure against the unit currently in the panel.
Q.Where can I find the certifications data for 1681460?
It is listed in the specification table for Phoenix Contact 1681460 as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1681460, what does the specification table state about rated torque?
The specification table lists rated torque = 0.4 Nm (M12 knurl) for Phoenix Contact 1681460. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1681460?
Send the full catalog number 1681460, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1681460.
Q.How do I confirm compatibility of 1681460 before ordering?
Match the catalog number 1681460 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.