Phoenix Contact · Connection Cable
1681127 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Tripping characteristic |
5 mm |
| Rated torque |
0.4 Nm (M12 knurl) |
| Mechanical |
| Weight |
25.2 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1681127 (this page) |
up to 4 A |
| 1681198 |
up to 4 A |
| 1681460 |
up to 4 A |
| 1681664 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1681127 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1681127
Phoenix Contact 1681127 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1681127; record the nameplate data of the unit being replaced before selecting an equivalent.
- Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Weight: 25.2 g — Check this value against the nameplate of the installed unit before ordering.
- Rated torque: 0.4 Nm (M12 knurl) — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1681127
Q.Which value is published under rated current Ie for catalog number 1681127?
For 1681127, rated current Ie is given as up to 4 A. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1681127, which weight entry should be checked?
The weight entry quoted above is 25.2 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the tripping characteristic data for 1681127?
It is listed in the specification table for Phoenix Contact 1681127 as 5 mm. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1681127 before ordering?
Match the catalog number 1681127 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1681127 replace the unit currently installed in my panel?
Compare catalog number 1681127 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.