Phoenix Contact · Connection Cable
1526981 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Frequency |
10 Hz |
| Rated torque |
0.4 Nm (M12 connector) |
| Rated speed |
1 octave/min |
| I/O and communication |
| Flame detection |
in acc. with UL FT-2 |
| Mechanical |
| Weight |
53 kg/km |
| Terminal wire size |
32x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1526981 (this page) |
up to 4 A |
| 1520372 |
up to 4 A |
| 1521261 |
up to 4 A |
| 1522888 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1526981 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1526981
Phoenix Contact 1526981 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1526981; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP67 (IEC 60529) — Match it to the existing panel and upstream protection.
- Rated torque: 0.4 Nm (M12 connector) — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1526981
Q.Before ordering 1526981, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for 1526981?
It is listed in the specification table for Phoenix Contact 1526981 as IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1526981, what does the specification table state about flame detection?
The specification table lists flame detection = in acc. with UL FT-2 for Phoenix Contact 1526981. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1526981 before ordering?
Match the catalog number 1526981 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1526981 replace the unit currently installed in my panel?
Compare catalog number 1526981 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.