Phoenix Contact · Connection Cable
1521261 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Tripping characteristic |
5 mm |
| Rated torque |
0.4 Nm (M12 knurl) |
| Rated speed |
100 Mbps |
| Mechanical |
| Weight |
56 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1521261 (this page) |
up to 4 A |
| 1520372 |
up to 4 A |
| 1522888 |
up to 4 A |
| 1522891 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1521261 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1521261
Phoenix Contact 1521261 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1521261; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 56 g — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Rated speed: 100 Mbps — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1521261
Q.Which value is published under tripping characteristic for catalog number 1521261?
For 1521261, tripping characteristic is given as 5 mm. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1521261, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the rated current Ie data for 1521261?
It is listed in the specification table for Phoenix Contact 1521261 as up to 4 A. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1521261 replace the unit currently installed in my panel?
Compare catalog number 1521261 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1521261?
Send the full catalog number 1521261, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1521261.