Phoenix Contact · Connection Cable
1522891 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Frequency |
10 Hz |
| Rated torque |
0.4 Nm (M12 connector) |
| Rated speed |
1 octave/min |
| I/O and communication |
| Flame detection |
in acc. with UL FT-2 |
| Mechanical |
| Weight |
53 kg/km |
| Terminal wire size |
32x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1522891 (this page) |
up to 4 A |
| 1522888 |
up to 4 A |
| 1522930 |
up to 4 A |
| 1520372 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1522891 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1522891
Phoenix Contact 1522891 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1522891; verify the catalog number against your bill of materials before requesting a quotation.
- Rated speed: 1 octave/min — Match it to the existing panel and upstream protection.
- Enclosure rating: IP67 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
- Terminal wire size: 32x 0.10 mm — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1522891
Q.Before ordering 1522891, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 4 A. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the terminal wire size data for 1522891?
It is listed in the specification table for Phoenix Contact 1522891 as 32x 0.10 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1522891, what does the specification table state about weight?
The specification table lists weight = 53 kg/km for Phoenix Contact 1522891. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1522891 before ordering?
Match the catalog number 1522891 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1522891 replace the unit currently installed in my panel?
Compare catalog number 1522891 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.