Phoenix Contact · Connection Cable
1522930 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Frequency |
10 Hz |
| Rated torque |
0.4 Nm (M12 connector) |
| Rated speed |
1 octave/min |
| I/O and communication |
| Flame detection |
in acc. with UL FT-2 |
| Mechanical |
| Weight |
53 kg/km |
| Terminal wire size |
32x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1522930 (this page) |
up to 4 A |
| 1522888 |
up to 4 A |
| 1522891 |
up to 4 A |
| 1520372 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1522930 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1522930
Phoenix Contact 1522930 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1522930; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Rated speed: 1 octave/min — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Terminal wire size: 32x 0.10 mm — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1522930
Q.Which value is published under weight for catalog number 1522930?
For 1522930, weight is given as 53 kg/km. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1522930, which frequency entry should be checked?
The frequency entry quoted above is 10 Hz. Confirm this figure against the unit currently in the panel.
Q.Where can I find the flame detection data for 1522930?
It is listed in the specification table for Phoenix Contact 1522930 as in acc. with UL FT-2. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1522930 replace the unit currently installed in my panel?
Compare catalog number 1522930 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1522930?
Send the full catalog number 1522930, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1522930.