Phoenix Contact 1425638 Connection Cable

SKU: 1425638
Regular price $435.60
In stock (54 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Connection Cable

1425638 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 690 V; Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Rated operational voltage690 V
  • Enclosure ratingIP67 (IEC 60529)
  • Operating temperature-25...+80 °C (IEC 60068-2-1)

Specifications

Electrical
Rated current Ie up to 4 A
Rated operational voltage 690 V
Rated torque 0.8 Nm ... 1.3 Nm (Installation-side)
I/O and communication
Flame detection in acc. to UL 1581 VW1
Mechanical
Weight 48 g
Mounting Rear mounting (M16 x 1.5, XL version, with flat nut, tightening limitation)
Terminal wire size Bare Cu litz wires
Enclosure rating IP67 (IEC 60529)
Environment and compliance
Operating temperature -25...+80 °C (IEC 60068-2-1)
Certifications CE, UL, cULus

Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Connection Cable variants
Catalog number Rated current Ie
1425638 (this page) up to 4 A
1425010 up to 4 A
1421305 up to 4 A
1424098 up to 4 A

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1425638 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 690 V — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Rear mounting (M16 x 1.5, XL version, with flat nut, tightening limitation) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1425638

Phoenix Contact 1425638 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1425638; verify the catalog number against your bill of materials before requesting a quotation.

  • Rated operational voltage: 690 V — Match it to the existing panel and upstream protection.
  • Flame detection: in acc. to UL 1581 VW1 — Record it with the other nameplate data when sourcing a replacement.
  • Terminal wire size: Bare Cu litz wires — Confirm the revision of the installed unit before a like-for-like replacement.
  • Rated torque: 0.8 Nm ... 1.3 Nm (Installation-side) — Use it as the reference when cross-checking a current-production equivalent.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 1425638

Q.Which value is published under operating temperature for catalog number 1425638?

For 1425638, operating temperature is given as -25...+80 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.

Q.Before ordering 1425638, which certifications entry should be checked?

The certifications entry quoted above is CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.

Q.Where can I find the rated current Ie data for 1425638?

It is listed in the specification table for Phoenix Contact 1425638 as up to 4 A. Confirm this figure against the unit currently in the panel.

Q.Can the 1425638 replace the unit currently installed in my panel?

Compare catalog number 1425638 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Q.What should I include in an enquiry for 1425638?

Send the full catalog number 1425638, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1425638.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!