Phoenix Contact · Connection Cable
1425010 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
According to UL 758/1581 (Cable Flame) |
| Mechanical |
| Weight |
159 kg/km |
| Terminal wire size |
5x 2.5 mm² |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1425010 (this page) |
up to 4 A |
| 1425638 |
up to 4 A |
| 1421305 |
up to 4 A |
| 1424098 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1425010 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1425010
Phoenix Contact 1425010 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1425010; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Weight: 159 kg/km — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP67 (IEC 60529) — Match it to the existing panel and upstream protection.
- Rated current Ie: up to 4 A — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1425010
Q.Which value is published under enclosure rating for catalog number 1425010?
For 1425010, enclosure rating is given as IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1425010, which weight entry should be checked?
The weight entry quoted above is 159 kg/km. Confirm this figure against the unit currently in the panel.
Q.Where can I find the flame detection data for 1425010?
It is listed in the specification table for Phoenix Contact 1425010 as According to UL 758/1581 (Cable Flame). Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1425010 before ordering?
Match the catalog number 1425010 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1425010?
Send the full catalog number 1425010, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1425010.