Phoenix Contact · Connection Cable
1419357 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingRear mounting (M16 x 1.5, with flat nut)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
3 Nm ... 4 Nm (Installation-side) |
| I/O and communication |
| Flame detection |
in acc. with UL FT-2 |
| Mechanical |
| Weight |
53 kg/km |
| Mounting |
Rear mounting (M16 x 1.5, with flat nut) |
| Terminal wire size |
32x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1419357 (this page) |
up to 4 A |
| 1419036 |
up to 4 A |
| 1411043 |
up to 4 A |
| 1411044 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1419357 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Rear mounting (M16 x 1.5, with flat nut) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1419357
Phoenix Contact 1419357 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1419357; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Rated torque: 3 Nm ... 4 Nm (Installation-side) — Match it to the existing panel and upstream protection.
- Weight: 53 kg/km — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: Rear mounting (M16 x 1.5, with flat nut) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1419357
Q.Which value is published under flame detection for catalog number 1419357?
For 1419357, flame detection is given as in acc. with UL FT-2. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1419357, which mounting entry should be checked?
The mounting entry quoted above is Rear mounting (M16 x 1.5, with flat nut). Confirm this figure against the unit currently in the panel.
Q.Where can I find the rated torque data for 1419357?
It is listed in the specification table for Phoenix Contact 1419357 as 3 Nm ... 4 Nm (Installation-side). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1419357?
Send the full catalog number 1419357, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1419357.
Q.How do I confirm compatibility of 1419357 before ordering?
Match the catalog number 1419357 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.